wtayax.blogg.se - Invacare hospital bed safety rails

Invacare hospital bed safety rails install#
Invacare hospital bed safety rails manual#
Invacare hospital bed safety rails full#

Invacare hospital bed safety rails install#

Repeat steps 1-8 to install the other bed rail onto the opposite side of the bed.

Repeat steps 3-6 for the inner side rail and the foot end crossbrace, adjusting the bed rail to the position determined in step 6.

Insert the inner side rail into the barrel of the foot end crossbrace.

Raise or lower the bed rail until the plunger knob clicks securely into the lower or upper adjustment hole or until the rail stop firmly rests against the barrel.

Release the plunger pin on the head end barrel.

Adjust the bed rail to one of the three positions.

Pull and hold the plunger pin on the head end barrel.

Insert the outer side rail into the barrel of the head end crossbrace.Extend one side rail to reach the head end and foot end crossbraces.

Invacare hospital bed safety rails manual#

Installing the Bed Rails According to the Invacare Instruction Manual Transfer bar- This is a device that is located on one or both sides of the bed to assist patients in and out of bed.One extends from the head of the bed to the middle of the bed and the other from the middle of the bed to the foot of the bed with a gap in between for entry. Quarter length- Extends about a fourth the length of the bed from the head.One-half length- This rail is half the length of the bed from the head.Three-quarter length- This rail extends about three-quarters of the length of the bed from the head.

Invacare hospital bed safety rails full#

Full length- Extends the full range of the bed from the head to the foot of the bed.

Patient difficulty getting in and out of bed.īed rails come in a variety of sizes and styles such as:.

Strangulation, suffocation, injury or death when the patient’s body or parts of their body get caught between the rails.

Injury from falls due to a patient climbing over the rails.

Bruising, cuts, and scrapes to the patient’s skin.They also provide easy access to bed controls.Bed rails help prevent the potential risk of a patient falling out of bed when sleeping or being transported.They provide the patient with a feeling of comfort and security within the hospital bed.They provide the patient with a handle to hold onto when getting in and out of bed.They help a patient with turning and repositioning within the bed.Some of the benefits and risks of bed rails include: They also prevent a patient who moves a lot in their sleep from falling out of bed. Note: Do not extend the length of Items 4 and 2 any further then the outside of the bed width.Bed rails have many purposes such as assisting patients in and out of bed. Attach item 4 to item 2 using items 9 and 10, establishing the closest width to bed ratio. Step 1Raise the Head Portion of the bed up. Screw - M8 x 1.25 x 65mm, SHCS, Zinc (Not Shown) Screw - M8 x 1.25 x 40mm, SHCS, Zinc, Nail-Like Tip Halo Safety Ring, Straight Tube with Width Adjusting Holes Halo Safety Ring C/Channel Circle Mounting Brackets The crossbrace and turnbuckle are used for both installation kits. The Single Side Halo uses the same mounting hardware as the Double Sided Halo. Product Number 77302 comes with same items as Product Number 77301 except one extra Halo Safety Ring Circle. Halo Safety Ring Installation Instructions This guide is for mounting models: